VCON VIGO Installation And Setup Manual - A.1
Appendix A Connecting Optional Accessories
A–2
VCON ViGO Installation and Setup Guide
A.1
Connecting External Speakers
Connecting Multimedia Speakers
As an option, the ViGO supports the use of external multimedia speakers instead of
the headset for hearing incoming audio. For two-way audio, they may be paired
with the headset, a tabletop microphone, or the camera’s built-in microphone.
³
To connect external multimedia speakers to the ViGO
-or-
If the speakers are connected to a sound card, connect the audio cable
between the Spkrs (left) connector on the ViGO side panel and the Line In
connector on the sound card.
2. In vPoint’s Control menu, choose Settings.
-or-
Open the Drawer and click the Settings tab.
3. Click the Hardware and Audio tabs.
4. In the Configuration Mode area, select Manual.
5. In the Speaker area, select Headset/External.
1. Connect the speakers to the Spkrs (left) connector on the ViGO side
panel.
External speakers do not receive power from the ViGO. To turn these
speakers on and off, and to control the volume, use the speakers’ controls.