VCON VIGO Installation And Setup Manual - page 43
Appendix A Connecting Optional Accessories
VCON ViGO Installation and Setup Guide
A–3
Connecting Multimedia Speakers to the ViGO
Connecting a VGA Monitor’s Speakers
For ViGO Executive
An additional option for enhancing the audio quality is the use of a VGA monitor’s
speakers. The ViGO Executive contains two additional audio cables for this audio
configuration.
³
To connect a VGA monitor’s speakers to the ViGO
2. Connect the second audio cable from the Audio Out connector of the
sound card to the Audio In connector of the VGA monitor.
3. In vPoint’s Control menu, choose Settings.
-or-
Open the Drawer and click the Settings tab.
4. Click the Hardware and Audio tabs.
5. In the Configuration Mode area, select Manual.
6. In the Speaker area, select Headset/External.
This configuration requires a sound card installed in the computer connected
to the ViGO.
1. Connect an audio cable between the Spkrs (left) connector on the
ViGO side panel and the Line In connector on the sound card