VCON VIGO Installation And Setup Manual - Connecting A Ptz Camera
Chapter 2 System Installation and Connections
2–8
VCON ViGO Installation and Setup Guide
Connecting a PTZ Camera
A controllable Pan/Tilt/Zoom (PTZ) camera is the standard supplied camera of the
ViGO Executive model, and is available as an option with the ViGO Professional.
The PTZ camera can be controlled from the vPoint application.
³
To connect a PTZ camera to the ViGO rear panel
2. Connect the Camera Control cable between the camera’s serial
communication connector and a free COM port on the computer.
3. Verify that the camera is connected to a power supply.
For specific instructions on installing and operating the PTZ camera, see its
accompanying user’s guide.
Connecting a PTZ Camera to the ViGO
1. Connect the yellow-tipped cable between the camera VIDEO OUT
connector and the Aux Video IN (yellow) connector on the ViGO
rear panel.
VIDEO OUT
Serial Communication
COM port