VCON VIGO Installation And Setup Manual - 3.4
Chapter 3 vPoint Setup
VCON ViGO Installation and Setup Guide
3–5
3.4
Starting and Exiting vPoint
vPoint’s Start procedure varies, depending on whether or not your system will be in
a videoconferencing network managed by a VCON Media Xchange Manager™
(MXM).
System Managed by MXM
³
To start vPoint
1. In the Windows Desktop, click the VCON vPoint icon.
-or-
Press the ViGO Smart button on the top of the device.
The Login dialog box appears.
Initial Login to MXM
2. Enter MXM login information as follows (consult with your system
administrator):
MXM Login
Name
The name of your computer as listed in the MXM
database and by the MXM Administrator.
Password/
Verify Password
Password required to log in. The first time you register,
you must type it twice for verification. If you do not
supply this password, the login request is rejected.
Gatekeeper
The IP address of the MXM. If you do not know it, ask
your system administrator.