WEG CFW-11 User Manual - page 11
General Information
2
CFW-11 | 2-1
2 GENERAL INFORMATION
2.1 ABOUT THE MANUAL
This manual exposes how to install, to start-up in V/f (scalar)
mode, the main characteristics and shows how to troubleshoot
the most common problems of the CFW-11 inverter series frame
sizes F, G and H models.
It is also possible to operate the CFW-11 in VVW, Sensorless Vector and Vector with Encoder modes. For more
details on the start-up in the other control modes, refer to the programming manual.
ATTENTION!
The operation of this equipment requires installation instructions and detailed operation provided in
the user manual, programming manual and manuals/guides for kits and accessories.
The user's manual and the parameters quick reference are supplied in a hard copy together with
the inverter.
The user guides are also provided in a hard copy along with the kit/accessories.
The other manuals are available at www.weg.net.
A printed copy of the files available on WEG’s website can be requested at your local WEG dealer.
For information on other functions, accessories and operation conditions, consult the following manuals:
Programming manual, with a detailed description of the CFW-11 parameters and advanced functions.
Incremental Encoder Interface module manual.
I/O Expansion module manual.
RS-232/RS-485 serial communication manual.
CANopen Slave communication manual.
Anybus-CC communication manual.
Manual of DeviceNet communication.
Manual of Ethercat communication.
Manual of Profibus communication.
Manual of Symbinet communication.
Manual of the SoftPLC.