WEG CFW-11 User Manual - page 113
Technical Specifications
8
CFW-11 | 8-7
8.3 CODES AND STANDARDS
Safety standards
UL 508C - power conversion equipment
Note: suitable for Installation in a compartment handling conditioned air.
UL 840 - insulation coordination including clearances and creepage distances for electrical equipment
EN61800-5-1 - safety requirements electrical, thermal and energy
EN 50178 - electronic equipment for use in power installations
EN 60204-1 - safety of machinery. Electrical equipment of machines. Part 1: general requirements
Note: the final assembler of the machine is responsible for installing an safety stop device and a
supply disconnecting device
EN 60146 (IEC 146) - semiconductor converters
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general requirements -
rating specifications for low voltage adjustable frequency AC power drive systems
Electromagnetic
compatibility (EMC)
EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC product standard
including specific test methods
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment – electromagnetic
disturbance characteristics - Limits and methods of measurement
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques -
section 2: electrostatic discharge immunity test
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques -
section 3: radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques -
section 4: electrical fast transient/burst immunity test
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques -
section 5: surge immunity test
EN 61000-4-6 - electromagnetic compatibility (EMC)- part 4: testing and measurement techniques
- section 6: Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-11 - Testing and measurement techniques - Voltage dips, short interruptions and
voltage variations immunity tests
Mechanical standards
EN 60529 - degrees of protection provided by enclosures (IP code)
UL 50 - enclosures for electrical equipment
IEC 61800-5-1 – adjustable speed electrical power drive systems - part 5-1: safety requirements -
electrical, thermal and energy
Level 10 Hz to 57 Hz – 0,075 mm of range 57 Hz to 150 Hz – 1g
8.4 CERTIFICATIONS
Certifications (*)
Notes
UL and cUL
E184430
CE
IRAM
C-Tick
EAC
ABS
Link: http://ww2.eagle.org/en/rules-and-resources/type-approval-database.html
After accessing the link, click on “Select Option” and select “Data Search”.
On the new window, the certificate number must be entered on the “Certificate Number” field: 15-RJ2890495.
Click on “Search”.
Functional Safety STO Funtion, with certificate issued by TÜV Rheinland.
(*) For updated information on certifications, please, contact WEG.