Zebra CPCL Programming Manual - page 187

Mobile Printer CPCLProgramming Manual

P10-35

information relevant to data transmis-

sion and the card itself.  This command/

response has the following form:

Command:

! U1 S-CARD CT_ATR

Response:

CT_DATA: This command is used to send a com-

mand to the smart card.  The response

from the card is returned.  A command

of this type has the following form:

Example:

! U1 S-CARD CT_DATA 10 8010000008

Description: CT_DATA: indicates the command is

to go to the smart card.

10 = length of command

8010000008 = Command to go to the

card in ascii form.  This command is

converted to binary and sent to the card.

Response for successful command:

Explanation of response:

 = Successfully send command to

the card and received a response.

 = The response length.  This

length is for data only (i.e. SW1 and

SW2 are not included in response

length).

 = This is the response from the

continued