Zebra CPCL Programming Manual - S-Card Command Examples

Mobile Printer CPCLProgramming Manual

P10-37

<0x11>

 = Invalid drive type (currently

only the Towitoko CHIPDRIVE micro is

supported)

<0x12>

 = Invalid operation

<0x16>

 = Invalid command length in S-

CARD command

S-CARD COMMAND EXAMPLES

This section provides some examples for using the S-

CARD command to communicate with the internal

Smartcard reader from the ‘External Terminal’.

Read card ATR

! U1 S-CARD CT_ATR

Response:

<0X0D>< 3B E3 00 FF 91 81 71 26 44 00

54 54 54>

Traceability command:

! U1 S-CARD CT_DATA 10 8010000008

Note:  When the printer actually sends

this command to the printer, it converts

the command to binary, adds the appro-

priate T=1 header and computes the

overall command checksum.  Then the

printer sends this command to the smart

card.

Response:

<08>< C9 1C 92 AA 66 19 A0 00><90><00>

CT_CLOSE command

! U1 S-CARD CT_CLOSE