Zebra CPCL Programming Manual - 4 Send Autoexec.

Mobile Printer CPCLProgramming Manual

P15-3

4 Send Autoexec.

Downloads an autoexec.bat file to the printer. If a .lbl

type file is downloaded using this command, It will be

converted from an .lbl file into an autoexec.bat type file.

The printer will execute this file on power up (i.e. print

the label described in the file).

5 Send as Run.bat

Sends either a  label  or a format file to the printer as a

RUN.BAT file.  Upon power up, and after running any

resident AUTOEXEC.BAT files, the printer will auto-

matically execute a RUN.BAT file.

6 Send as FF.BAT

Sends a selected label file to the printer as a FF.BAT

file.  The printer will automatically execute a FF.BAT file

whenever its “Feed” key is pressed.

7 Send all Files in Label

This command will send all fonts and pictures associ-

ated with the current label file to the printer.  There

must be sufficient memory in the printer to accept all of

the files, and they must all be located in the current

Label Vista working directory.

8 Diagnostic Send

Downloads a file without checking for status or validity.

This function is usually used when the printer has been

placed in the Communications Diagnostics Mode.

Refer to Section 1 of this manual for complete informa-

tion on utilizing the Communications Diagnostic Mode.

Label Vista has an extensive set of context-sensitive

help files which will aid you in using the various file utili-

ties available.

Using Label Vista for Wireless Configuration

Label Vista can also be used to configure the various

versions of Mobile Wireless Printers.  A Wireless Configu-

ration Guide is available in the Zebra Web site at:

http://www.zebra.com/SS/manuals/WirelessQuickStart.pdf