Zebra CPCL Programming Manual - Power.Inactivity_Timeout
P14-34
Mobile Printer CPCLProgramming Manual
power.inactivity_timeout
type: getvar; setvar
This parameter refers to the inactivity timeout.
getvar result
Current inactivity timeout in seconds.
Example
Description
Instructs the printer to respond with
the inactivity timeout value.
Syntax
! U1 getvar
“power.inactivity_timeout”
Result
“120 Seconds”
setvar choices
“0” through “65535”. Values are specified in
seconds. A value of “0” disables inactivity timeout.
Default
“120”
Example
Description
Set inactivity timeout to 120
seconds.
Syntax
! U1 setvar “power.inactivity_timeout”
“120”
Result
Printer inactivity timeout will be set
to 120 seconds.
power.low_battery_timeout
type: getvar; setvar
This parameter refers to the low battery timeout. When
the printer reaches the low battery state this timeout will
become active. The printer will shut down after the speci-
fied low battery time out
getvar result
Current low-battery timeout in seconds.
Example
Description
Get current low-battery timeout.
Syntax
! U1 getvar
“power.low_battery_timeout”
Result
“60”
setvar choices
“0” through “65535”. Values are specified in
seconds. A value of “0” disables low-battery
timeout.
Default
“60”
Example
Description
Set low-battery timeout to 60
seconds.
Syntax
! U1 setvar
“power.low_battery_timeout” “60”
Result
Printer low-battery timeout will be
set to 60.