Zebra CPCL Programming Manual - Wlan.Bssid

P14-66

Mobile Printer CPCLProgramming Manual

wlan.bssid

type: getvar

Returns the MAC address of the access point with which

the printer is associated.  This value is only relevant

when “wlan.associated” returns “yes”.

getvar result

MAC address of access point

Example

Description

Get the MAC address of the AP

Syntax

! U1 getvar “wlan.bssid”

Result

“00:d0:f2:57:13:3d”

wlan.current_essid

type: getvar

This parameter refers to the eSSID of the network cur-

rently associated with the printer. The eSSID is returned

only if the printer is associated with an access point.

getvar result

This will return the eSSID that the printer is asso-

ciated with in Infrastructure mode. When the

printer is in Ad Hoc mode it will return the stored

eSSID. (For more information on Infrastructure

and Ad Hoc modes see wlan.operating_mode.)

Example

Description

This command instructs the printer

respond with the current eSSID.

Syntax

! U1 getvar “wlan.current_essid”

Result

“ZebraNet”

Note: This parameter is not supported in units using a Frequency Hopping

Spread Spectrum (FHSS) radio.  The “wlan.essid” parameter can be used in-

stead.