3Com CoreBuilder 9000 Command Reference Manual - page 181

management ip advancedPing

181

Management IP Advanced Ping Example

Select menu option (ip): advancedPing

Enter host IP address [0.0.0.0]: 158.101.112.56

Enter number of ICMP request packets (1-9999) [3]:

Enter packet size (bytes) (28-4096) [64]:

Enter Burst Transmit Ping mode (disabled,enabled) [disabled]:

Enter Quiet mode (disabled,enabled) [disabled]:

Enter time (sec) waits between sending each packet (1-20) [1]: 2

Configure ICMP sourceAddress? (n,y) [y]:

         Index    Interface address

           0      Best interface (default)

           1      158.101.117.151

           2      158.101.10.1

Select interface index {0-2|?} [0]: 1

Press "Enter" key to interrupt.

PING 158.101.112.56 from 158.101.117.151: 64 byte packets

64 bytes from 158.101.112.56:  icmp_seq=0.  time=26. ms

64 bytes from 158.101.112.56:  icmp_seq=1.  time=18. ms

64 bytes from 158.101.112.56:  icmp_seq=2.  time=18. ms

---- 158.101.112.56 PING Statistics ----

3 packets transmitted, 3 packets received, 0% packet loss

round-trip (ms)  min/avg/max = 18/21/26