3Com CoreBuilder 9000 Command Reference Manual - page 731
qos rsvp enable
731
Procedure
1 Enter the maximum total reservable bandwidth, using a percentage of
the output link (a value of from
0
through
200
, with
50
as the default).
2 Enter the maximum per-reservation bandwidth, using a percentage of the
output link (a value of from
0
through
100
, with
50
as the default).
3 Enter the policing option (
edge
,
always
, or
never
, with
edge
as the
default).
4 Enter the service level for excess/policed traffic (
best
or
low
, with
low
as the default).
5 Specify whether excess packets are loss eligible (
yes
or
no
, with
no
as
the default).
Service level
for excess
/policed traffic
Service level for excess/policed
traffic. Low is recommended.
This setting applies to the
excess traffic with the reserved
bandwidth (that is, which
queue it should be placed in).
■
best
■
low
low (factory
default)
Excess Loss
Eligible
Whether excess packets are
loss-eligible
■
yes
■
no
no (factory
default)
Prompt
Description
Possible Values [Default]