3Com CoreBuilder 9000 Command Reference Manual - page 306
Other manuals for CoreBuilder 9000:
Manual, Removal And Replacement Manual, Device View User Manual, Installation Manual, Installation Manual, Quick Start Manual, Quick Installation Manual, User Manual
Manual is about: 3Com Switch Command Reference Guide
of
784
306
C
HAPTER
11: T
RUNKS
TCMP
Whether TCMP is
enabled
or
disabled
for the trunk.
Tcmpstate
TCMP state for each port in the trunk:
■
notInUse
— Not selected for use in the trunk
■
selected
— Selected for use in the trunk, but not
yet active in the trunk
■
inUse
— Active in the trunk
Trunk state
State (
up
or
down
) of each port link in the trunk.
txFrames
Number of TCMP messages that were transmitted on
each port.
txHellos
Number of TCMP helloMessages that were transmitted on
each port.
Type
The network type that you assigned to the ports in the
trunk (for example,
FDDI
,
Fast_Ethernet,
or
Gigabit_Ethernet
).
Field
Description