3Com CoreBuilder 9000 Command Reference Manual - Bout
A
BOUT
T
HIS
G
UIDE
This Command Reference Guide provides information about the
commands that you use to configure and manage your system or module
after you install it. Before you use this guide, you should have already
consulted documents such as your system Getting Started Guide or
module Quick Start Guide and physically installed your system or module.
Several CoreBuilder
®
and SuperStack
®
II platforms are documented in this
book. Table 1 lists the specific platforms and the current software release
level of that platform as it relates to the information contained in this
book:
This guide is intended for the system or network administrator who is
responsible for configuring, using, and managing the system. It assumes
a working knowledge of local area network (LAN) operations and
familiarity with communications protocols that are used on
interconnected LANs.
If the information in the release notes that are shipped with your product
differs from the information in this guide, follow the instructions in the
release notes.
Table 1 Platforms Covered in This Document
Platform
Release
CoreBuilder
®
3500
3.0
SuperStack
®
II Switch 3900
3.0
CoreBuilder 9000
3.0
SuperStack II Switch 9300
3.0
CoreBuilder 9400
3.0