B&G Triton Display Installation Manual - | 33

| 33

Calibration | 

B&G Triton Display Installation Manual

DRAFT COPY

Distance reference

This facility enables the user to calibrate the log accurately and 

simply. Calculations are performed by the display that works out the 

boat speed over a known distance. 

To calibrate the boat speed via a distance reference you will need to 

complete consecutive runs, under power at a constant speed made 

along a given course and distance. 

¼

Note: 

To eliminate the effect of tidal conditions it is advisable to 

perform at least two runs, preferably three, along the measured 

course.

How To Calibrate via Distance Reference

Enter the desired distance in nautical miles that you would like to 

calculate the distance reference over.

When the boat gets to the predetermined starting position of the 

distance reference calculation start the calibration timer.