B&G Triton Display Installation Manual - 40 |
40 |
Autopilot |
B&G Triton Display Installation Manual
Boat Type
Type of boat selected will affect the steering parameters, and the
functions available in the autopilot system. The options are: Planing,
Displacement, Sail and Outboard.
¼
Note:
Wind mode is only available if boat type is set to sail.
Drive voltage (V)
Setsthedrivevoltagetypeto12or24V
Rudder Feedback Calibration
Make sure the unit is installed and aligned as per instruction in the
AC12/42Installationmanual.Therudderfeedbackcalibrationwill
set the correct relationship between the physical rudder movement
and the rudder angle readout.
Max starboard
•
Manually move the helm to starboard until the rudder stops at
starboard lock hard over.
•
The Max starboard angle is the angle read by the rudder feedback
unit before any adjustment is made.
•
If the actual rudder angle is different from the angle displayed,
correct the reading with the Up/Down keys.
•
Confirm Rudder feedback calibration to starboard by selecting Next.
Max port
•
Manually move the helm to port until the rudder stops at port lock
hard over.
•
Adjust the displayed angle the same way as for starboard rudder.
•
Confirm Rudder feedback calibration to port by selecting Next.