B&G Triton Display Installation Manual - | 57

| 57

Troubleshooting | 

B&G Triton Display Installation Manual

DRAFT COPY

Troubleshooting

Issue

Solution

Unit does not power up

•

Check that the NMEA2000/

SimNet network has 12V 

connected.

•

Try connecting to a 

different network cable in 

case power wires damaged 

internally.

Unit does not show data for a 

specific source

•

In the advanced setup 

menu, select sources, 

and manually select the 

required data source.

•

Check the network 

connection on the data 

source.

Unit does not show any data 

from any connected source

or

Unit data sources intermittently 

drop out.

•

In the advanced setup 

menu, select sources 

option, then select AUTO 

SELECT.

•

Check the Device List menu 

and see if any devices are 

detected.

•

Try connecting to a 

different network cable in 

case data wires damaged 

internally.

•

In the advanced setup 

menu, check the 

diagnostics page to see if 

any errors are occurring.

•

Check network topology 

and termination rules are 

correctly implemented.

•

Disconnect other devices 

fromnetwork,one-by-one,

starting with 3rd party 

devices.