B&G Triton Display Installation Manual - | 47
Manual is about: Triton Display
of
64
| 47
Autopilot |
B&G Triton Display Installation Manual
DRAFT COPY
Selection of Hi / Lo parameters
The Manual select item has three alternatives:
Auto – Hi – Lo.
•
Auto is automatically set by speed input
•
Hi or Lo must be set manually when there is no speed input
Thesub-headlineinthedisplayshowstheactiveparametersetand
how it is selected.
Wind response
Verify that the difference between Set Heading and the actual
heading is at an acceptable minimum.
If the difference between the set wind angle and the actual
wind angle is too high, increase the Wind response to reduce the
difference.
IftheactualwindangleisS-ingaroundthesetwindangle,orthe
rudder activity is too high, the Wind response should be reduced.
Range
Change per step
Default
1-9
1
4