B&G Triton Display Installation Manual - 48 |
48 |
Autopilot |
B&G Triton Display Installation Manual
Sea state filter
The Seastate filter is used to reduce rudder activity and autopilot
sensitivity in rough weather.
Off:
Seastate filter is disabled. This is default.
Auto:
Reduces rudder activity and autopilot sensitivity in
rough weather by an adaptive process. The Auto
setting is recommended if you want to use the
Seastate filter.
Manual
Linked to the Response control setting in the Main
menu. It may be used to manually find the optimum
combination of course keeping and low rudder
activity in rough but steady sea conditions.
Sailing
Set how the Pilot will respond when it is set for use with a sail boat.
Note: Sailing is only available in the menu if Boat type is set to Sail in
the Installation menu.
Tack time
When performing a tack in Wind mode, the rate of turn (tack time)
canbeadjusted.Thiswillgivesingle-handedsailorstimetohandle
the boat and the sails during a tack.
A turn performed without shifting wind side, will also be made at a
controlled turn rate.
Range
Change per
step
Default
Units
2-50
1
12
Second