B&G Triton Display Installation Manual - | 3
| 3
Preface |
B&G Triton Display Installation Manual
DRAFT COPY
The software
This manual is written for B&G Triton Release to Market 1 (RTM1).
Please check web site for details on the current release version.
¼
Note:
The menu route shown above is an example only and may
not match the software installed on your unit!
¼
Note:
To update the software you will need a compatible
multifunction display / chartplotter running on the network. eg.
B&G Zeus multi function display (MFD).
If you do not have a suitable device on the network you can arrange
to update the software via a B&G dealer.
You can download the latest version of the software from
www.bandg.com
and upgrade the displays via the B&G MFD,
instructions on how to do this can be found on the B&G website.
www.bandg.com
¼
Note:
The manual may have been updated to match new software
releases. The latest available manual version can be downloaded
from
www.bandg.com
¼
Note:
Portions of this software are copyright © 2011 The FreeType
Project (www.freetype.org). All rights reserved.