Baldor MicroFlex e100 Installation Manual - page 152
www.baldormotion.com
C-10 Mint Keyword Summary
MN1943
Keyword
Description
MOTORDIRECTION
To set or read the electrical direction of the motor.
MOTORFEEDBACKANGLE
Reads the instantaneous value of commutation angle for
the motor.
MOTORFEEDBACKOFFSET
To set or read the electrical angle at which the absolute
position read from an EnDat, BiSS or SSI encoder is
zero.
MOTORFLUX
To set the motor’s magnetic flux level, to allow the drive
to accurately calculate motor torque and compensate for
back-EMF.
MOTORLINEARPOLEPITCH
To set or read the distance between north poles on a
linear motor.
MOTORLS
To set or read the motor leakage inductance.
MOTORMAGCURRENT
To set or read the magnetizing current (I
m
) of an
induction motor.
MOTORMAGIND
To set or read the magnetizing inductance (L
m
) of an
induction motor.
MOTOROVERLOADAREA
Reads the extent of an overload condition.
MOTOROVERLOADMODE
To set or read the action taken in the event of a motor
overload condition.
MOTORPEAKCURRENT
To set or read the peak current rating of the motor.
MOTORPEAKDURATION
To set or read the duration for which peak motor current
can be sustained.
MOTORPOLES
To set or read the number of motor poles.
MOTORRATEDCURRENT
To set or read the rated current of the motor.
MOTORRATEDFREQ
To set or read the rated frequency of an induction motor.
MOTORRATEDSPEEDMMPS
To set or read the rated speed of a linear induction motor
in millimeters per second.
MOTORRATEDSPEEDRPM
To set or read the rated speed of an induction motor.
MOTORRATEDVOLTS
To set or read the rated voltage of an induction motor.
MOTORROTORLEAKAGEIND
To set or read the rotor leakage inductance of an
induction motor.
MOTORROTORRES
To set or read the rotor resistance of an induction motor.
MOTORRS
To set the motor stator resistance.
MOTORSLIP
To read the slip of an induction motor.
MOTORSPECNUMBER
To return the spec number of the motor.