Baldor MicroFlex e100 Installation Manual - page 163
Other manuals for MicroFlex e100:
Quick Start Manual
Manual is about: Servo Drive
of
172
www.baldormotion.com
CE & UL C-5
MN1942
D.1.7 Wiring of shielded (screened) cables
Remove the outer insulation
to expose the overall shield.
Clamp should provide 360°
contact with the cable.
Flat or p-type
conductive clamp
Figure 62 - Earthing/grounding cable shields
1
9
2
10
3
11
12
13
MicroFlex e100
X8
Encoder Connector
Housing
Cable
Twisted pairs
Connect overall shield
to connector backshell.
Connect overall shield
to connector backshell.
CHA+
CHA-
CHB+
CHB-
CHZ+
CHZ-
+5 V
DGND
Figure 63 - Encoder signal cable grounding