Baltmotors ATV200-D Owner's Manual - Control Functions
Indicator lights
Reverse indicator light“R ”
Main switch
Functions of the respective switch positions are
as follows:
ON:
Engine can be started only at this position and
the headlight and taillight come on when the light
swithc is on.
OFF:
All electrical circuits are switched off.The key
can be removed in this position.
This indicator light comes on when the trans-
mission is in reverse.The light is blue in color.
Neutral indicator light“ ”
This indicator light comes on when the trans-
mission is in neutral.
High beam indicator light“ ”
This light is yellow in color .It comes on when
the head light and high beam light is on.
Handlebar switches
Engine stop switch
Make sure that the engine stop switch is in
the “ ” position.The engine stop switch
controls ignition and can be used at all times to
stop the engine,especially in an emergency.The
engine will not start or run when the engine stop
switch is turned to“ ”.
Start switch
The starter motor cranks the engine when this
switch is pushed.
See starting instructions prior to starting engine
(see page for details).
If the starter switch is pushed with the
N
OFF
ON
-3-