Baltmotors ATV200-D Owner's Manual - page 31
-20-
Know the terrain where you ride
Ride carefully in complicated terrain ,stay alert
for holes,rocks or roots or roots in the terrain other-
wise may cause the machine to tip over.
W hen riding in an area where you might not
easy to be seen ,such as dune and hilly land ,must
mount a caution flag on the machine to remind
other vehicles. Do not ride in areas of forbidding
pass.Do not ride on private property.Operation
course
CAUTION
Do not shift gears without releasing the throttle.
Otherwise may cause damage to the engine or drive
gear.
W hen slowing down or stopping,release the
throttle and brake gradually. As you brake,shift to
lower gear .Ensure that the engine has sufficiently
slowed Improper use of the brakes or shifting can
cause the tires slidding to lose the control .
Must make the engine to slow down fully before
engaging a lower gear.
Turning
Must make the turning practice in low speed
before making a turn.
Turn your ATV according to procedures in op-
eration ,manual.Practice should be done before turn-
ing in high speed.
The turning speed should not be too high.
As you approach a curve,slow down and begin
to turn the direction rod .Then put you gravity center
on the footboard to the outside of the curve and lean
your body inside .Make the engine to maintain an
even speed when passing the curve.This maneuver
will let the tire on the inside of the curve slip slightly.
The turning practice should be in flat area with-
out any obstacles.Improper operation may make
your ATV to go straight.If the ATV doesn’t turn,stop it
and practise again .If the riding surface is loose and
slippery,move your weight forward.
Once you have learn this technique you can turn
your ATV at higher speed.
The sudden acceleration,brake,incorrect body
position and too high speed will cause the ATV to
slip.If the ATV slips while passing a curve and the