Baltmotors ATV200-D Owner's Manual - page 38
Manual is about: ATV200-D
of
58
Engine oil
1.Engine oil level measurement
a. Place the machine on a flat surface wram up
the engine for several minutes and turn off it.wait
more than 10 minutes for the oil to drain back into
the crankcase before checking the oil level.
b.The oil level should be between maximum
and minmum marks .If level is low,add oil to raise it
to proper level.
1.Oil filter cover
2.Oil filter
3.O-ring
-27-
1. Oil level
1.Drain plug
2.O-ring
3.Compression spring.
4.Oil strainer
①