Baltmotors ATV200-D Owner's Manual - page 46
Manual is about: ATV200-D
of
58
3.Retate the adjusting bolt at the front brake le-
ver to make the free play satisfy the requirement.
Specified free play:
5-7mm(0.2-0.3in)
4.Tighten the locknut
After maintaining,pay attention to :
Make sure the brakes operate smoothly and
the free play meet the requirement;
Make sure the brakes do not skid.
Replacement of brake components requires
professional knowledge.These procedures should
be done by our Group dealer.
Rear brake adjustment
1.Brake pedal
a.Fully loosen the adjusting nut on the brake
cable.
b.Rotate the adjusting nut on the brake rod untill
free play is 20-30mm.
a.5-7mm
1.Brake cable adjusting nut 2.Brake rod adjusting
nut
-35-
1 . A d j u s t in g n u t
(front hub)
①
①
②
a