Baltmotors ATV200-D Owner's Manual - page 50
Manual is about: ATV200-D
of
58
1.Remove the headlight cover.
2.Remove the cover ,and rotate the bulb holder
counterclockwise and remove the defective bulb.
1.Main fuse 2.Start relay
-39-
1.Battery
tioned time,check the voltage at least one month.
Charge the battery when the voltage is lower than
12V.
Fuse replacement
1.The fuse case is put under the seat.
2.If the fuse is blown ,switch off the main switch
and replace with a new fuse of the same specifiction.
If the fuse immediately blows again ,consult a our
Group dealer.
Specified fuse:20A
CAUTION
To prevent accidental short-circuting,switch off
the main switch when checking or replacing a fuse.
Replacing the headlight bulb
If the headlight bulb burns out,replace the bulb
as following steps:
1.Headlight