Baltmotors ATV200-D Owner's Manual - page 32
-21-
ATV machine leans inward ,you should release
the throttle and move your body gravity center to out-
side of the curve to avoid tipping over.
Remember:ride at higher speed only after you
are thoroughly familiar with the operation of your ATV
Climbing slope
Don’t ride on slope before you are very familiar
with ATV operation skill.otherwise it will cause
accidents.
Neccessary practice is required.when climbing
the hill,move your body gravity center forward and
operation manual.
Climb the hill ac cording to the method in
manual.
Climb the hill ac cording to the method in
manual.
Check carefuly before climbing.
Do not drive on slippery and loose slope.
Transfer your body gravity center forward and
avoid abrupt acceleration and shift.
Drive in low speed when climbing the hill.
WARNING
There may be other vehicles and persons on
the other side of slope .
If your ATV can not climb the slope,turn round
your ATV.
Make turning practice according to procedures
in operation manual.Do not make turn on slope .Be
more careful when making a turn on slope.Be more
careful when making a turn on slope and avoid to
climb steep slope when possible .when climbing
the slope:
Do not drive on depression and slippery slope
and drive according to procedures in operation
manual.
Ensure the ATV not to slip when stop it on slope.
The shift should be proper and speed shuld be
stable when climbing slope.losing traction force,you
should transfer the gravity center forward and brake
the machine.Close the brake closing piece after stop-
ping the machine.
If the machine slips backward
Transfer you gravity center backward;
Use front brake;