Baltmotors ATV200-D Owner's Manual - page 42
1.Spark plug gap
Spark plug gap:
0.5-0.7mm
-31-
Spark plug inspection
You should periodically remove and check the
spark plug because heat and deposits will cause
slow damage and erosion of the spark plug if elec-
trode erosion is excessive,you should replace the
spark plug with one of the propet type D8EA
Before installing the new spark pulg measure
the electrode gap with a feeler gauge and adjust to
spectifcation.
W hen installing the spark pulg,generally clean
the gasket surface and use a new gasket. Clean off
an y g r im e f r o m t h e th r ead s an d tig h t en t o
specification.
Spark plug torque:17.5Nm(1.75m.kg)
Air fillter cleaning
There is a check hose at the bottom of the air
fillter case.if there are dust or water collects in this
hose,empty the hose and clean the air filter element
and air filter case.
1.Remove the seat.
2.Remove the air filter case cover.
1.Check hose
①
①