Calculated Industries 6260 User Manual - page 15

[PC SEND]

When connected to a PC, sends the value 

on the main display in decimal format to 

the PC (see PC Interface section).

 [ARC/CIRC]

First press identifi es a new 

measurement as an Arc, second 

consecutive press identifi es it as a Circle. 

Three points must be measured for an 

Arc; two points (diameter) or three points 

must be measured for a circle. The 

Ultra Scale Master Pro

 will auto-close 

three-point Arc or Circle measurements.

[MR] (Memory Recall)

First press displays the accumulative 

Memory value; second consecutive 

press displays Memory Count; third 

consecutive press displays the Memory 

Average. Repeated presses cycle back 

through this list of values.

[SET] [MR] (Memory Clear)

Clears the accumulative Memory.

Directional Pad (D-PAD)

When a measurement is ended or closed, 

pressing the D-Pad displays calculated 

values (disabled during measuring). Also 

used for setting Preferences, Height, and 

Custom Scales.

U

SER’S 

G

UIDE

 — 13