Calculated Industries 6260 User Manual - Measuring Arcs
Manual is about: Area Take-Off Tool and Digitizing System
of
52
MEASURING ARCS
OPERATING SEQUENCE
1. Press the [ON/CLEAR] key twice to clear the display.
Press the [ARC/CIRC]* key once to enter Arc Mode. Place
the crosshairs over the Start Point of the Arc and press
the [MEASURE] key.
2. Move to the High Point of the Arc and press the
[MEASURE]
key.
3. Move to the Final Point of the Arc and press the
[MEASURE]
key.
*
You must identify the measurement as an Arc before you
start measuring.
1
2
High Point
Start Point
1
2
3
3
Final Point
32 — U
LTRA
S
CALE
M
ASTER
®
P
RO