Calculated Industries 6260 User Manual - page 40

SETTING AN ENTERED CUSTOM SCALE (IMPERIAL MODE)

1. Press [MODE] until “CUST” is displayed. Press [SCALE] 

to scroll through the four available Custom Scales. For 

this example, Custom Scale-1 is used.

2. Press [SET] then press [SCALE] [SCALE] to begin 

entering the Custom Scale.

3. The displayed units begin fl ashing, indicating that they 

are ready to be changed. Press [UNITS] to scroll through 

the available units.*

4. Use D-Pad right [4] to begin value entry mode. The 

selected digit begins fl ashing, indicating that it is ready 

to be changed. Use D-Pad right [4] and left [3] to move 

between the digits.

5. Use D-Pad up [5] or down [6] to increase or decrease the 

selected digit.

6. To store the Custom Scale, press [SET] or [SCALE]. To 

confi rm the scale has been set, “Scl Set” is displayed for 

one second. Entered Custom Scales display the Inch-to-Feet 

scale ratio instead of “OPEN” or “SET” (e.g. 1:15 for 1 Inch = 

15 Feet).

*

In Imperial Mode, only the following units are available: Feet-Inch, Feet and Inches

38 — U

LTRA 

S

CALE 

M

ASTER

®

P

RO