Calculated Industries 6260 User Manual - Pc Interface

PC INTERFACE

The Ultra Scale Master Pro with PC Interface can be used to send displayed 

numerical values from your Puck directly to the selected estimating, spreadsheet, 

word processing, or text editing program on your PC. It can also be used to send 

data to digitizing programs while in Digitizer Mode (see Digitizer Mode section).

The PC Interface is a ten-foot long 

USB cable specially designed for 

use with the Ultra Scale Master Pro. 

There is no driver software needed. 

Simply follow the instructions 

below to connect your 

Ultra Scale Master Pro

 to your PC. 

SYSTEM REQUIREMENTS:

— Windows 2000, XP, Vista Operating Systems — One USB port

Note: When connected to a PC, a small PC-shaped icon will appear at the upper right side of the Puck’s display, indicating a valid connection has 

been established. This icon will be displayed only when the USB cable is securely connected to the Puck and the PC. The USB cable is specially 

designed for use only with the Ultra Scale Master Pro. The Ultra Scale Master Pro cannot be used with any other USB cable.

42 — U

LTRA 

S

CALE 

M

ASTER

®

P

RO

2. Insert the large 

end of the USB 

cable into the USB 

port on the PC.

1. Insert the small end of the USB 

cable into the USB plug located on the 

bottom end of the Puck.