Calculated Industries 6260 User Manual - page 23
Manual is about: Area Take-Off Tool and Digitizing System
of
52
PERIMETER
WALL AREA*
HEIGHT*
SIDE 1
SIDE 2
4. Press the [END]
key. The total
Perimeter is
displayed. Once
a measurement is
ended, press the
D-Pad down [6] to
display Perimeter,
Wall Area, and
stored Height.
Continuous presses
of the D-Pad down
[6] or up [5] will
scroll back and forth
through the values.
4
5. Press the D-Pad
right [4] to display
the individual side
Lengths in sequential
order beginning with
side one. Repeated
presses of the D-Pad
left [3] will scroll back
through the sides in
descending order.
5
U
SER’S
G
UIDE
— 21
*
Wall Area and Height do not
display if a Height has not been
set. For this example, a Height of
eight Feet was used (See Setting
a Height section for instructions
on setting a Height).