Calculated Industries 6260 User Manual - page 39

5. The displayed units begin fl ashing, indicating that they 

are ready to be changed. Press [UNITS] to scroll through 

the available units.*

6. Press D-Pad right [4] to begin value entry mode. The 

selected digit begins fl ashing, indicating that it is ready 

to be changed. Use D-Pad right [4] and left [3] to move 

between the digits.

7. Press D-Pad up [5] or down [6] to increase or decrease 

the selected digit.

8. To store the Custom Scale, press [SET] or [SCALE]. To 

confi rm the scale has been set, “Scl Set” is displayed for 

one second. Stored Custom Scales display “SET” instead 

of “OPEN” (e.g., 1 SET).

*

In Imperial Mode, only the following units are available: 

Feet-Inch, Feet, and Inches.

In Metric Mode, only the following units are available: Meters, 

Centimeters, and Millimeters.

Note: This example is shown in 

Imperial Mode. The displays will be 

slightly different if in Metric Mode.

U

SER’S 

G

UIDE

 — 37