D-Link DI-206 User Manual - Dynamic Nat

DI-206 ISDN Remote Router

92

Configuration and

Management

Dynamic NAT

This screen (below) is how the NAT IP Pool appears, ifDynamic NAT

was chosen for the Translation Mode parameter. Each entry, in this

configuration, can be used to map multiple, contiguous global addresses

and local addresses to each other.

The parameters are described below:

•

  Global IP – An IP Address that is globally unique and valid on the

Internet. It is the base, global address for the global addresses that

will be recognized by the interface in the Global Interface parameter.

•

  Range – This is the range of contiguous, global addresses above

(and including) the base Global IP.

•

  Local IP – An IP Address that is only used in the stub domain since

it is not unique. It is the base, local address for the local addresses