D-Link DI-206 User Manual - Telephone Features
DI-206 ISDN Remote Router
12
Installatio
n
ISDN – This socket is used to connect the ISDN line to either an NT-
1 or directly to the ISDN wall jack, depending on the type of service
delivered by your phone company.
ETHERNET – The six Ethernet ports function as a normal 10 Mbps
10BASE-T Ethernet hub.
•
Uplink – This port is used to connect the router to another
hub using a straight-through twisted-pair cable.
•
Ports 1x to 5x – These five ports can be used to connect
end-stations to the router using straight-through cables.
Telephone Features
Up to two telephones can be attached to the DI-206 router via the
Phone 1 and Phone 2 telephone jacks located on the rear of the router.
The router enables the attached telephones to have a number of
features which may or may not be found on normal telephones and are
described below. Additional features which must actually be configured
are described in the InterfaceConfiguration – ISDN sub-menu
section of this manual.
♦
Hold – This feature is very similar with and can work in conjunction
with call waiting as defined in the Interface Configuration –
ISDN sub-menusection of this manual. Press Flash 0 to place
someone on hold (Flash is a very brief hanging up of the phone).
Press Flash 2 to take the caller off hold.
♦
Hold (and pick up from another location) - Telephones
connected to the router can be put on hold by pressing Flash 71,