D-Link DI-206 User Manual - page 56
DI-206 ISDN Remote Router
44
Configuration and
Management
SNMP Trap Manager Configuration
From the SNMP Agent Configuration menu, select and enter the
SNMP Trap Manager sub-menu. You will see the following
configuration screen:
The parameters are described below:
•
IP Address – Enter the IP address of the host who will act as an
SNMP Management Station. The DI-206 router will send SNMP
traps to these addresses.
•
SNMP Community String – The community string is a user-
defined identifying name used to group together some arbitrary set of
SNMP application entities managed by the network manager. Traps
will be sent to the IP Address (previous parameter) as long as the
corresponding Community String, in the Management Station’s trap
manager software, is the same.