D-Link DI-206 User Manual - page 85
DI-206 ISDN Remote Router
Configuration and Management
73
The parameters of a filter are described below:
•
Name – This is a 12 character (maximum), alphanumeric, user-
defined name, used to identify the filter.
•
Direction – This defines the direction of the frame relative to the
Interface parameter below.
•
State – This is used to choose the routing decision applied to the
frame. The three decisions are described:
1. forward –This allows the routing of the frame, if it has met the
criteria of the corresponding filter.
2. drop – This drops (doesn’t allow routing for) a specific frame
that has met the criteria of the corresponding filter.
3. disable – This does not apply the protocol independent filter.
•
Interface – This applies the filter to a specific interface, either LAN
or one of the ISDN interfaces.