D-Link DI-206 User Manual - Configuration File Example

DI-206 ISDN Remote Router

168

Appendix F – Configuration

File

disable is the parameter you set.

Configuration File Example

# The system configuration file for D-Link DI-206 Router

# DI-206 runtime image file name (software update path and

file name)

di206-image d:\project\di206\runtime\image\206run\206run.hdr

# sysname (string name)

sysname DI-206 Router

# syscontact (string name)

syscontact Engineering Administrater, Admin

# syslocation (string name)

syslocation Myson Building 6th floor

# systimeout setting in minutes (0 means no timeout)

systimeout 10

# telnet stat (enable/disable)

telnet enable

# ip routing stack (enable/disable)

ip-routing enable

# interface decription (string name)

lan-port-1 System Lan Interface

# port stat (enable/disable)

port-stat enable

# ip address

ip-address 202.39.74.119

# subnet mask

ip-netmask 255.255.255.0

# routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2)

routing-type 2

# routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both)

operating-mode 0

# ip routing stat (enable/disable)

ip-stat enable