D-Link DI-206 User Manual - Appendix A - Troubleshooting
DI-206 ISDN Remote Router
Appendix A - Troubleshooting
155
Appendix A - Troubleshooting
This chapter contains some problems you may run into when using your
router. After each problem description, we have provided some
instructions to help you diagnose and solve the problem.
Some Common Problems With the DI-206
None of the LEDs are on when you power up the router
♦
Check the power cord and the power supply and make sure it is
properly connected to your DI-206. If the error persists you may
have a hardware problem. In this case you should contact
technical support.
Connecting the RS-232 cable, cannot access the console program
♦
Check to see if the DI-206 is connected to your computer’s
serial port.
♦
Check to see if the communications program is configured
correctly. The communications software should be configured as
follows:
◊
VT100 terminal emulation.
◊
9600 Baud rate.
◊
No parity, 8 Data bits, 1 Stop bit.