D-Link DI-206 User Manual - Static Napt
Other manuals for DI-206:
User Manual
Manual is about: ISDN Router
of
189
DI-206 ISDN Remote Router
Configuration and Management
95
•
Local IP – This is a single, local IP Address that is not valid on the
Internet.
•
State – Enables or disables this entry.
Static NAPT
This screen (below) is how the NAT IP Pool appears, if Static NAPT
was chosen for the Translation Mode parameter. Each entry in this
configuration can be used to map a global address and port to a local
address and port. Notice that the global address will be the external IP
address of the global interface.
The parameter not explained in the previous sections is described as
follows: