D-Link DI-206 User Manual - The Di-206 Rear Panel

DI-206 ISDN Remote Router

Installation

11

isolated from the LAN because of excessive collisions (partitioning is a

required capability of all Ethernet hubs).

PHONE – 1— Lights up when standard phone port 1 is in use.

PHONE – 2— Lights up when standard phone port 2 is in use.

The DI-206 Rear Panel

POWER — This socket is an 18 volt, 750mA power input jack. If the

power adapter included with the router has been lost or misplaced,

please ensure that the replacement adapter meets both the voltage and

amperage requirements.

CONSOLE – This 9-pin RS-232 port is used for connecting a console

or PC running a terminal emulation program. It provides out-of-band

management capabilities for the initial setup and configuration of the

router.

PHONE 1 and 2 – These normal telephone jacks can be used to

connect telephones or fax machines to the router for use over the ISDN

lines. Plug telephone devices into these jacks as you normally would

into a telephone wall socket.