D-Link DI-206 User Manual - Configuring A Filter Set
Other manuals for DI-206:
User Manual
Manual is about: ISDN Router
of
189
DI-206 ISDN Remote Router
70
Configuration and
Management
Configuring a Filter Set
Under the Advanced Functions menu, select Filter Configuration.
You will see the following screen:
The three sub-menus are described as follows:
•
Filter State of Interface – This is used to choose the default,
routing decisions for packets, not meeting the criteria for specific
filters.
•
Layer 2 Filter– This is a data-link layer (protocol independent)
filter. Foreknowledge of the specific protocol, used on the interface
(LAN or WANs), is needed to make effective use of this filter.
•
IP Filter– This is an IP protocol specific filter, allowing you to,
among other things, prohibit specific packets from entering the LAN.