D-Link DI-206 User Manual - Built-In Hub

DI-206 ISDN Remote Router

2

Introductio

n

combination ISDN router and 10 Mbps Ethernet hub, and it uses

twisted-pair Ethernet cables to connect to the host network.

Built-in Hub

As a 10 Mbps Ethernet hub, your DI-206 provides six ports for

connecting standard Ethernet devices. Five ports are designed for

connecting network end nodes—single-user computers, servers,

bridges, other routers, etc.—through standard “straight-through”

twisted-pair cables; the sixth is wired for making an “uplink” connection

to another hub or switch through the same type of straight-through

cable used to connect end nodes.

ISDN Basic Rate Interface (BRI)

Using a standard S/T the DI-206 supports DSS1 ISDN switches. The

two ISDN B-channels can be used independently for two destinations,

or they can be bundled together for one high-bandwidth connection

supporting bandwidth-on-demand.

ISDN Leased Line

If the router is set up for an ISDN leased line, it can automatically

initialize the leased-line connection each time it is powered up.

Standard Phone Jacks

The router is equipped with two standard phone jacks for connecting

telephones, fax machines, or modems. This allows the ISDN line to be

used for voice as well as data calls.