D-Link DI-206 User Manual - Using Telnet Via Isdn

DI-206 ISDN Remote Router

Using Telnet

151

4.  Enable Telnet in the Advanced Functions  submenu.

5.  Connect the router to the LAN.

The router can now be accessed via the LAN by the included

Windows-based Configuration program, Telnet and SNMP

management applications. For more detailed information regarding

these procedures, please refer to the Connecting the Router section of

this manual. For more information about the submenus, please refer to

the Configuration and Management section of this manual.

Using Telnet via ISDN

Preparing the router for management by telnet over ISDN lines requires

more initial configuring of the router via the console.

To do this, you must configure an ISDN port for dial-in users. Please

refer to the Interface Configuration,ISDN submenusection of this

manual.

System Timeout

When you are connected to your DI-206 via Telnet, there is a system

timeout (in the System Information submenu), adjustable to a

maximum of 90 minutes. If you are logged onto the device and leave it

inactive for this timeout period, the router will automatically disconnect

you.