EDAN iSE-301 User Manual - page 20

SE-301 Series Electrocardiograph User Manual                           Operation Preparations 

- 14 - 

1.  Connecting the Patient Cable to the Electrocardiograph 

Connect the patient cable to the patient cable socket on the right side of the main unit, and then 

secure them with two screws. 

2.  Connecting the Patient Cable to Electrodes 

Align all lead wires of the patient cable to avoid twisting, and connect the lead wires to the 

corresponding electrodes according to the colors and identifiers. Firmly attach them. 

3.4 Attaching Electrodes to the Patient 

There are two types of electrode for you to choose, one is the reusable electrodes, and the other is 

the disposable electrodes. The uses of the two types of electrode are as shown below: 

3.4.1 Reusable Electrodes 

Reusable Electrodes is divided into Limb electrode and Chest Electrode, as the following figure 

shows: 

Chest Electrode 

Suction Bulb 

Electrode 

Metal Cup 

Connecting to 

Electrocardiograph

Screw 

Main Cable 

Connecting to 

Electrodes 

Lead Wires