EDAN iSE-301 User Manual - page 26

SE-301 Series Electrocardiograph User Manual                       Sampling and Printing ECG 

- 20 - 

Chapter 4 Sampling and Printing ECG 

4.1 Entering Patient Information 

4.1.1 Entering Patient Information Manually 

On the main screen, the following information is displayed: patient information, system hints, 

heart rate, waveforms, current time, battery capacity, WIFI signal (optional), and functional keys. 

Click the patient symbol to enter the patient information window, enter the patient information, or 

you can configure the patient information items in system setup first. 

NOTE: The patient information cannot be set or changed during the printing course. 

Item 

Description 

Pacemaker 

Select  Yes to detect very small pacemaker pulses. However, when 

Pacemaker is set to Yes, the system is very sensitive, and should not be 

close to equipment emitting high frequency radiation. High frequency 

radiation can interfere with pacemaker pulse detection and normal ECG 

acquisition. 

NOTE: Pacemaker is recommended to be set to No unless it is 

known that the majority of the electrocardiograph usage 

will be on patients with pacemakers.