EDAN iSE-301 User Manual - And External Memory

SE-301 Series Electrocardiograph User Manual                          Managing ECG Records 

- 27 - 

-  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

-  Consult the dealer or an experienced radio/TV technician for help. 

2. 

Any changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user's authority to operate the equipment.

5.2 Copying ECG Records between the ECG Machine 

and External Memory 

1.  Connect the external memory to the electrocardiograph. 

2.  Click File to open the File Manager screen. 

3.  Choose More > Trans All,andclick OK, all the records will be transmitted to the external 

memory automatically. 

During the transmission, if something wrong happens, the electrocardiograph will give the 

error information. Then you should check whether the external memory is connected to the 

electrocardiograph well. 

4.  If you want to import records from the ECGDATA folder of the external memory to the 

electrocardiograph, click the Import button, the extended-name of imported records should 

be “.dat”. 

NOTE: To import records from the external memory to the electrocardiograph, there 

should be some records in the folder named ECGDATA in the external memory. 

The folder name ECGDATA must be capital letters. You should not change the 

name of records in the ECGDATA folder. 

5.  If you want to export only one record, choose the patient record in the table and click Export. 

NOTE:  

1.  The transmission process is long, and please be patient to wait.   

2.  During the transmission, the external memory should not be pulled out. 

3.  Only FAT or FAT32 format can be used when formatting the external memory.